Title Graphic

Gasket Digital Library
Seperator Bar

Go Back

This is a collection of the different gaskets for use in my 89 Turbo Supra. On this page are the description, pictures and part numbers. I was going to give high res versions with detailed measurments, but that was just to time consuming, but you can click for a high-res version.. So I hope this is useful or at least cool to look at.

Gasket Kits
  • Gasket Kit, Engine Overhaul (04111-42023)
  • Gasket Kit, Turbocharger (???)
  • Crush Washers
    Part Number Description ID (mm) OD (mm) Tk (mm) Type
    90430-12005 Turbo Oil Inlet Pipe
    Gasket (For Fuel Pipe Support)
    12.00 16.00 1.00 Cu
    90430-14235 Union, Water By-Pass Pipe, #2 14.25 20.00 1.00 Cu
    90430-20010 Oil Filter Bracket Union Bolt 20.00 30.00 1.00 Cu
    15134-20010 Oil Filter Relief Valve 18.00 24.00 1.00 Cu
    90430-22008 Gasket (For Water By-Pass Pipe) 24.30 31.00 1.00 Al
    90430-12026 Gasket (For Fuel Pipe) 24.30 31.00 1.00 Al
    90430-14006 Gasket (For Pulsation Damper Hose)0 17.00 22.00 1.60 Al
    90430-17007 Gasket, Pipe Fuel Delivery Inlet 14.00 18.30 1.20 Al
    90430-10204 Gasket (For Fuel Pressure Regulator) 10.30 14.20 1.00 Al
    90430-12026 Gasket (For Fuel Pipe) 12.10 16.00 1.00 Al

     

    Idle Speed Controller: (22278-42010)
    Turbo Water Pipe: (16347-28010)
    Turbo Oil Outlet: (15473-41010)
    Turbo Oil Inlet: (15471-54010)
     
     
     
    Turbo to Exhaust Manifold: (17278-42010)
    Turbine Outlet Elbow: (17279-42010)
    Exhaust Pipe Gasket: (90917-06050)
    EGR Cooler: (25685-42011)
    PS Pressure Port: (44327-12010)
     
    Insulator, Injector Vibration: (23291-41010)
     
    Ring, O (For Fuel Injector): (90301-07001)
     
    Grommet (For Fuel Injector): (90480-13005)
     
    Gasket, Water Outlet Housing: (16343-42020)
     
    Insulator, Fuel Pipe Support: (90923-06012)
     
    Seal, Oil (For Timing Gear Cover): (90311-52003)
     
    Seal, Oil (For Timing Gear Case): (90311-42026)
     
    Seal, Engine Rear Oil: (90311-80001)
     
    Gasket, Engine Rear Oil Seal Retainer: (11383-41010)
     
    Gasket, Water Pump Cover: (16124-42020)
     
    Gasket, Front End Plate No1: (11312-42010)
     
    Gasket, Front End Plate No2: (11313-42020)
     
    Gasket, Water By-Pass: (16347-42010)
     
     

    Exhaust Manifold to Head: (17173-42010)

    Intake Manifold to Head: (17177-42020)

    Air Surge Tank to Intake Manifold: (17176-42020)




    Questions, comments, rude remarks contact webmaster.
    CygnusX1 hits: 5931389